Skip to content Skip to sidebar Skip to footer

Is 5/16 The Same As 8Mm

Is 5/16 The Same As 8Mm. Suite 114 torrance, ca 90501 united states call us at: If it does, then it’s 16mm and it’s a silent reel.

5/16" 8mm Pilot Spiraled Guide
5/16" 8mm Pilot Spiraled Guide from www.cylinderheadsupply.com

19mm = 3/4 inch ; 17mm = use a 11/16 socket; 16mm = use a 5/8 socket;

5 / 16 = 0.3125.


Gauges are also tricky when it comes to stretching, because you’re not stretching the same amount every time. Well, quick answer is no. Your security is our top concern!

So The 8Mm Will Be A Bit Large On The 5/16 Fastener, The 5/16 May Be A Bit Small On The 8Mm.


A lot of tool manufacturers consider 5/16 and 8mm interchangeable. As for diameters, 8mm is.31496 giving a grand total of.00246 or.00123 difference per side compared to 5/16 (.3125). For the most part, handgun calibers are either 9, 10, 11, or 12mm.

Therefore, To Convert The Inch As A Decimal To Millimeters, We Multiply The Inch As A Decimal By 25.4 To Get Our Answer.


1 inch [in] is equivalent to 25.40 millimeters [mm] mm. 15mm = use a 9/16 socket; Mm to inch conversion chart:

Yes I Was Picturing Joining 5/16Th Imp.


16mm = use a 5/8 socket; 8mm = 5/16 inch ; 10mm = just over 3/8 inch.

But When You Stretch From 2G To 0G, That’s 2.


9mm = almost 3/8 inch. With mfg tolerances for the fasteners, you can probably use either socket on either bolt. Also, are 8mm and 5/16 the same?

Post a Comment for "Is 5/16 The Same As 8Mm"